Maximus-Mini+
As the miniature speaker on the Plus(+) series product lines, Mark & Daniel® now proudly presents to the world the premium Maximus-Mini+ speaker. With capabilities to the amazing, near to full sound scale, high-fidelity sound reproductions that far beyond to her tiny size, the Maximus-Mini+ monitor presents a direct challenge to ordinary “full-sized” hi-fi speakers!
The compact size and stunning sonic performance of the Maximus-Mini+ monitor enables her to be used in practically any application where a full range, high fidelity speaker is desired, and space is at a premium. Because of her compact size, the Maximus-Mini+ speaker may be used in a wide variety of applications. From the mini monitoring system for Pro-Audio to Home Theater, Stereo Hi Fi reproduction, and PC station and gaming systems, the Maximus-Mini+ monitor enables everyone to enjoy true high fidelity sound from an incredibly small package. After long research, having uniquely developed the super-thin diaphragm craft on his Dreams-a AMT drivers and incorporated the new QMA design on the SX woofers, the Maximus-Mini+ speaker has proven how a puny speaker is possible to create a huge sound and unparallel performance; a great innovation by M&D again, to challenge the mission impossible!
The two-way, bi-wired Maximus-Mini+ features one DM-2a Dreams super tweeter with only the 0.0125mm, one-half thickness super-thin diaphragm design. The DM-2a driver is installed on the front panel to cover a very wide audio range from 950Hz up to 35KHz over the original DM-2’s 1.4KHz crossover point; this modified Air Motion Transformer covers 5-octaves band with superb detail and impressive dispersion characteristics!
On the other hand to the new 4.0” SX woofer with M&D’s uniquely QMA (Quantified Magnets Alignment) design, having unparallel ±9.0mm (0.7”) Xmax excursion, the SX4.0q-0.7 woofer has been assembled onto Maximus-Mini+ speaker; a stunning bass reproduction on amplitude (under high SPL output), frequency (for system F3 down to an amazing 48Hz), and full Q-control (along with the complete excursion range) have been optimized within this tiny body.
Maximus-Mini+ has the dimensions only to: H25.4cm (10.0“) xW15.0cm (5.9”) xD17.9cm (7.0“); a rein-forced compound marble enclosure with the diamond shaped panel for effectively reducing the diffractional sound interferences and for aesthetic design, is extremely solid and heavy that each weighting 6.6 Kg (14.5 lb) to this tiny body.
Maximus-Mini+ speaker has equipped an iron grille on the panel for proper protections to the woofer; due to the high openness to the grille plus the woofer is only working to the mid-bass ranges, the influence to sound reproduction by the grill is negligible. Therefore, the grille is not necessary to be taken out from the panel during auditions.
There are 4 small pads beneath each speaker enclosure to prevent the surface scratch; 4 bolts are reserved at the enclosure’s bottom to fasten the speaker to other hardware such as wall mounting applications, easily accessed by removing the cover pads at the bottom of each speaker.   The nominal impedance is 3-6 ohms with average efficiency being 82.5 dB/2.83V/1m. A power amplifier with 60 watts per channel as a minimum is recommended to properly drive the Maximus-Mini+ speaker. If possible, with two mid-power amplifiers configured as the bi-amp playback system can significantly improve the sound quality during reproduction. Product Description: Maximus-Mini+ Speaker
Frequency Response: 48Hz - 35KHz Two-way Crossover: 950 Hz Nominal Impedance: 3-6 Ohms Average Efficiency: 82.5dB/2.83V/1m Power Handling: 60 Watts Enclosure Material: CAM solid surfacing Overall Size: H25.4 xW15.0 xD17.9 cm (H10.0” xW5.9” xD7.0”) Weight (each): 6.6 Kg (14.5 lb) 
[ HOME ]
|
